Maitland Mobilisation Grades I–V Explained: What Each Grade Does and When
If you have ever had a physiotherapist move your joint back and forth in small, rhythmic oscillations, you have experienced joint mobilisation — one of several techniques under the broader manual therapy umbrella. This article zooms in on one thing in particular: the grading system that governs how those mobilisations are applied. Developed by Australian physiotherapist Geoffrey Maitland, it classifies mobilisation into five grades based on the amplitude of the movement and where in the available range it is performed. Knowing the grades explains why the same hands-on technique can feel soothing one week and like a deep end-range stretch the next. For the wider picture of what manual therapy is and the other techniques it includes, see our overview, Manual Therapy: What It Is and How It Helps →
The Maitland Grading System Explained
Grade I is a small-amplitude oscillation performed at the very beginning of the available range. It is gentle and primarily used to manage pain and reduce muscle guarding in acute or highly irritable conditions — for example, a recently sprained ankle or an acutely inflamed shoulder. The rhythmic motion stimulates mechanoreceptors that inhibit pain signalling.
Grade II uses a larger amplitude, still within the early to mid-range but not reaching the point of tissue resistance. This grade is used when the joint is painful but not significantly stiff. It continues to modulate pain while beginning to improve fluid movement within the joint capsule.
Grade III is a large-amplitude oscillation that reaches into the resistance felt at the end of the available range. This is where mobilisation starts to address stiffness directly, stretching the joint capsule and surrounding soft tissue. It is commonly used for frozen shoulder, post-surgical knee stiffness, and cervical facet joint restrictions.
Grade IV is a small-amplitude oscillation performed specifically at the end of range, directly into the resistance barrier. This is the most targeted grade for treating joint stiffness and capsular tightness. Your physiotherapist may use Grade IV mobilisations on the glenohumeral joint to restore overhead reach or on the thoracic spine to improve rotation.
Grade V is a high-velocity, low-amplitude thrust — what many people call a "joint manipulation" or "adjustment." It produces the audible pop or crack (cavitation) that results from gas bubbles collapsing within the synovial fluid. Grade V is used for specific joint restrictions where mobilisation alone has not restored full movement. It requires additional training and is applied only when clinically indicated.
What to Expect During a Mobilisation Session
Your physiotherapist will assess your joint range of motion and pain behaviour to determine which grade to use. You will be positioned comfortably — typically lying down — while the physiotherapist applies rhythmic pressure to the joint. Grades I and II should feel soothing, almost like a gentle rocking. Grades III and IV involve more pressure and you may feel a stretching sensation at the end of range, but the technique should remain tolerable.
Treatment is typically performed in sets of 30 to 60 seconds, repeated 3 to 5 times, with reassessment between sets. Your physiotherapist will check whether your range of motion has improved and whether pain has decreased before deciding to continue, progress, or change approach. Mobilisation is almost always followed by exercises to reinforce the newly gained range — otherwise the improvement tends to be temporary.
Who Benefits Most from Manual Therapy Mobilisation?
Joint mobilisation is effective for conditions involving joint stiffness and restricted range of motion, including frozen shoulder (adhesive capsulitis), post-fracture stiffness, cervical and thoracic facet joint dysfunction, osteoarthritis of the knee or hip, and post-surgical joint tightness. It is also useful for patients with neck pain and headaches arising from the upper cervical spine.
Mobilisation is not appropriate for joints with active infection, unstable fractures, severe osteoporosis, or hypermobility (where the joint already moves too much). Your physiotherapist will screen for these factors during your assessment and choose the most appropriate grade and technique for your situation.
Dealing with Joint Stiffness or Restricted Movement?
At Kinesio Rehab in Putra Heights, our physiotherapists use graded mobilisation techniques tailored to your specific joint condition and pain level.
Learn About Manual TherapyThis article is for general education only and is not a substitute for an individual medical assessment. Please consult a qualified physiotherapist or doctor for diagnosis and treatment of your specific condition.